PC Softlite Sheet, PC Softlite Sheet - Tileron Enterprise Co.,Ltd

Products Series From Tileron

Home > Products Series From Tileron > Polycarbonate Sheet > PC Corrugated Sheet

PC Corrugated Sheet

PC Softlite Sheet

Function

1. Why we decide to create the “SoftLite” ?
As we design the “SOFTLITE”, we’ve plus the Corrugated PC Sheet structure on it and it could be applied to reduce the heat penetration .Its intensity is between PC Solid sheet & Embossed sheet with sunshade effect. So the strengths for the “SOFTLITE” listed as following:

A. With the strength of Corrugated PC sheet structure : The SOFTLITE is thin & strong that’s because we use the same structure as Corrugated PC sheet but without the weakness of Corrugated PC Sheet. Then we did ignore the real function of PC flat sheet which will be tougher when it is thin. For example :The regular PC corrugated sheet(5 grooves) is made for the natural lighting of steel-construction factory use .The thickness design for 0.8mm~1.0m/m is using popularly and to instead of the traditional FRP sheet.

B. The applications of Emboss sheet is for: The surface and appearance of Regular PC flat sheet only could be produced like the transparency of regular glass or only could be produced by embossed design . Each of these two different sheet just could be designed and produced individually which could not be put on the single sheet at the same time. The characteristic of glass is transparency but it will lighting much through to transmit heat to much, the temperature in interior of the house is often over the load of human could stand. Otherwise, the strength of the emboss sheet are refraction and reduce the heat-transmission but at the same it will reduce the light into indoor. It will make the vision of darkness especially in the morning, nightfall & cloudy day. Therefore, the SOFTLITE has the strength of glass & emboss sheet and with well-lighting & less-heating concurrently. “ Only tender vision, no heating” is what we emphasize always. You can understand the light’s different transmission on the SOFTLITE more clear as following diagram: The conclusion that this is the best PC lighting sheet for the strength well-rigidity, well-lighting & competition price.

2. You don’t have to change the way of construction as before:

The design of the regular corrugated sheet and Arc-corrugated sheet although with the well-rigidity even can be collocated into steel-construction factory for lighting. But the defect is can’t be settled on curve-bone frame, especially on “ㄇ” type construction frame because it easy to make the surface twist with force even broken. The SOFTLITE has the same design of the surface with regular corrugated sheet but without the defect of regular corrugated sheet on installing. Therefore it can adopt the same install way and no extra train for installing.

3. The Comparison Table of PC Sheet:

Items	Pc flat sheet	PC hollow profile sheet	SOFTLITE
1.Impact strength	medium	low	high
2.Banding Strength	medium	low	high
3.Rigidity	low	high	medium
4.Total Diaphaneity Ratio	87%	78%	58%
5.Heat Isolation	bed	good	good
6.Dust Stickiness	high	high	low
7.Appendant Value	low	medium	high
8. Life Period	over-saturated	Saturated	just germinal
9. Market Future	bed	medium	excellent

4.SOFTLITE PC Sheet Design & Features

Design

Features

1.	a.	To improve both the PC flat sheet & PC embossed sheet
1.	b.	Avoid the impact of direct sunshine. Utilization of the photo spectrum will let the sunshine become declining and the light become tender .

1.	a.	Reducing the thermo conductivity from regular PCclear sheet ; Improving the luminous conductivity from regular PC embossed sheet .
1.	b.	The interval fine embossed surface, decline diaphanous surface band structural and highly rigid structure design help to improve above disadvantages to avoid the directly sunshine and make the declining light tender.

2.	a.	The plates of the upper and lower peak are built in reverse direction and with low static electricity, fine embossed design.
2.	b.	The material could keep away the pollution in a very long term and very easily to be cleaned up by the rain.

2.	a.	In considering of the requirements of the exterior PC sheet , the light is the only favor instead of the heat.
	b.	When the strongest sunshine hit the embossed surface of SOFTLITE , around 50% of light would be reflected. In this way the interior would be with enough luminous but less heat.
	c.	The fine-grain design keeps away the sticking of dusts on the surface.

3.	The flat transparent design on the decline part.

3.	a.	When the sun shines on the sheet in declination, 40% of the light is allowed to go through the flat transparent surface band into the interior of the room.
3.	b.	The flat transparent surface gives the light effects of the primary and secondary reflections.

4.	The highly rigid structure has increased the strength much more than increasing the thickness of the flat sheet.

4.	The highly rigid structure has replaced the way by increasing the thickness of the sheet for a better strength.

Specification

Typical Properties of SOFTLITE embossed & corrugated sheet (1mm)

\	Property	Conditions	ASTM Method	Units-SI	Value
Physical	Density		D-1505	g/cm3	1.2
Physical	Water Absorption	24 hr. @23°C	D-570	%	0.15
Mechanical	Tensile strength at yield	10 mm/min	D-638	MPa	62
	Tensile strength at break	10 mm/min	D-638	MPa	65
	Elongation at yield	10 mm/min	D-638	%	7
	Elongation at break	10 mm/min	D-638	%	>80
	Tensile Modulus of Elasticity	10 mm/min	D-638	MPa	2,300
	Flexural Modulus	1.3 mm/min	D-790	MPa	1,890
	Flexural Strength at Yield	1.3 mm/min	D-790	MPa	93
	Notch Impact Strength IzodIzod	23°C	D-256	J/m	800
	Notch Impact Strength Charpy	23°C	D-256	J/m	800
	Impact Falling Weight		ISO-6603/1a	J	50
	Rockwell Hardness		D-785	R scale	118
Thermal	Long Term Service Temperature			°C	-75 to +100
	Short Term Service Temperature			°C	-75 to +120
				°C	135
	Heat Deflection Temperature	Load: 1.82 MPa	D-648	°C
	Vicat Softening TemperatureVicat	Load: 1 kg	D-1525	°C	150
	Coefficient of Linear Thermal Expansion		D-696	10-5cm/cm °C	6.5
	Thermal Conductivity		C-177	W/m K	0.21
	Specific Heat Capacity		C-351	kJ/kg K	1.3
Optical	Haze		D-1003	%	<0.5
	Light Transmission		D-1003	%	90
	Refractive Index		D-542		1.57
	Yellowness Index		D-1925		<1
Electrical	Dielectric Constant	1 kHz	D-150		2.6
		1 MHz	D-150		2.4
	Dissipation Factor	1 kHz	D-150		0.005
		1 MHz	D-150		0.02
	Dielectric Strength Short Time	500 V/s	D-149	kV/mm	20
	Surface Resistance	Ketley	D-257	Ohm	4.1x10¹⁵
	Volume Resistance	Ketley	D-257	Ohm-cm	1.7x10¹⁷

Note about cookies

This site uses cookies to provide you with a better user experience. Our website uses cookies, which could include also third party cookies. For more information please visit our Privacy and Cookie Policy page. By continuing to use the site or closing this banner, you are agreeing to our terms of use. Close